===== Installation Guide for Radio Module RMS using Jooby Mobile App =====

To install Radio module with sensor for gas meter (here and after - Radio module) in this case please follow next steps:
  - Shut off the resource supply through the meter (gas). 
  - Go to the app. On the **Installation list** screen, click **Add** (+) in the bottom right corner of the screen.
  - In the app scanning window, scan the QR code or enter the serial number of the radio module (S/N row of the radio module marking data) manually.
  - On the New **installation screen**, please  fill the information about your installation:
    - Take a photo of the meter without mounted radio module. <wrap tip>Important! The photo should clearly read the meter readings.</wrap> ou may take a photo of the meter without the mounted radio module after step 1 is done and download it from the Gallery.
    - Resource type (gas)
    - Manufacturer and model of the meter
    - Serial number of the meter
    - Meter readings at the moment of installation starting. {{ :ru:rdc:gas_accounting:app._gas_sensor_installation.png?direct&500 |}}
  - Mount the Radio module on the meter body as indicated on Pic.1a, 1b. Be sure that the radio module LED-status indicator flashes once shortly immediately after mounting and then it flashes shortly several times more in ~20 sec. Herewith activation of the radio module is done automatically. {{ :ru:rdc:gas_accounting:samgas_sensor.jpg?direct&600 |}}
  - Come back to the app on **New installation** and specify:
      - Take a photo of the meter with the mounted radio module. <wrap tip>mportant! The photo should clearly read the meter readings as well as the marking data of the radio module.</wrap>
      - Comments (optional).
    - Click **Done** on the screen of the mobile app.
    - If the installation was successful, you can see a corresponding message. Click **Finish job**. The installation is finished.
If the radio module has not been activated, you can see Error message. Then the installation was not completed successfully. To retry the installation, repeat step 9 and click **Try again**.

{{ ru:rdc:gas_accounting:goog_error.png?direct&500 |}}