en:rdc:gateways:start []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<WRAP group>
<WRAP box>
====== LoRaWAN Gateways ======
<WRAP half column>
  * [[https://jooby.eu/contact-en/|Jooby Sales]]
  * [[https://jooby.eu/device-type/gateway-en/|Jooby LoRaWAN Gateways]]
</WRAP>

<WRAP half column>

</WRAP>
</WRAP>
{{:en:rdc:gateways:head.png?nolink&400|}}
</WRAP>



===== Overview =====

==== JOOBY Outdoor Gateway LoRaWAN 3хх/4хх ====


{{:en:rdc:gateways:dual_circuit_board.png?nolink&600|}}

{{:en:rdc:gateways:mainboard.png?nolink&600|}}

  - Mini PCIe Card LoRaWAN Concentrator
  - Ethernet/PoE. PoE - IEEE 802.3af/at, <wrap em>Mode B (midspan), 4/5(+),7/8(-)</wrap> 
  - USB 2.0
  - Nano SIM-card slot
  - CPU
  - Backup battery connector. For 12V Li-ion/Li-Pol Battery.
  - Power connector DC 12-16,5V. DС 12V - without using a backup battery. DC 15V±1,5V power supply is required to charge the Backup battery [[https://en.wikipedia.org/wiki/Charge_pump|Charge Pump]]
  - RS485
  - Tamper connectors

{{:en:rdc:gateways:indication_board.png?nolink&600|}}

  - Functional button (Fn). [[#Factory reset|Factory reset]]/[[#Switching memory bank/Alternate memory bank|Switching memory bank]]
  - Slot for RTC battery Li-ion CR/BR 2032
  - LED Indicators

{{tablelayout?rowsHeaderSource=Auto}}
^  **LEDs name**  ^  **Function**                                            ^  **Colour**                                                                                      ^
|  **POWER**                                                                                                                                                                  |||
| DC_IN           | Availability of DC power supply                          | green                                                                                            |
| PoE             | Availability of PoE power supply                         | green                                                                                            |
| BAT             | Charging status of Backup Battery                        | Charging in progress – red, Fully charged - green                                                |
|  **SYSTEM**                                                                                                                                                                 |||
| STATUS          | Status Indication of Gateway                             | Normal work mode/Successful loading – green, Error / Standby - red                               |
| ALARM           | Disconnecting the tamper – Gateway case has been opened  | red                                                                                              |
|  **LTE**                                                                                                                                                                    |||
| STATUS          | LTE is activated                                         | green                                                                                            |
| NET             | LTE is connected                                         | Yellow led blinks slowly when searching network, Yellow led blinks fast when transfer is online  |
| GNSS            | GNSS is working                                          | green                                                                                            |
|  **LAN**                                                                                                                                                                    |||
| Link            | Link                                                     | green                                                                                            |
| ACT             | Activity                                                 | yellow                                                                                           |
|  **LoRaWAN**                                                                                                                                                                |||
| 1               | First LoRaWAN Module is available                        | blue                                                                                             |
| 2               | Second LoRaWAN Module is available                       | blue                                                                                             |
| NET             | Connection to server is available                        | green                                                                                            |
| WLAN            | WiFi is available                                        | green                                                                                            |
| 1PPS            | 1PPS signal is available                                 | green led blinks once per second if available                                                    |
| RS485           | RS485 receive/transmit                                   | green – receive progress, red – transmit progress, 0 – Not active                                |


==== Factory reset ====
In this case, the hardware reset rule is 30-30-30.
  * Long press (30 sec) - System|Status led blinks red;
  * When System|Status led lights red, then release Fn  - wait for 30 sec;
  * System|Status starts to blink yellow – long press (30 sec);
  * System|Status led and System|Alarm led light red – release Fn;
  * Factory reset completed successfully. The device will be rebooted. 

==== Switching memory bank/Alternate memory bank ====
  * Long press (30 sec) - System|Status led blinks red;
  * When System|Status led lights red, then release Fn  - wait for 30 sec;
  * System|Status starts to blink yellow – long press (15 sec);
  * System|Status led lights red – release Fn;
  * The device will be rebooted and loads from an alternate memory bank.





===== Access to Web GUI =====

<WRAP center round tip 70%>
<WRAP centeralign>
By default, web-interface is available on **Lan** and **Wi-Fi** only. Wi-Fi interface is available as an option, depending on gateway model.\\
Web-interface settings can be changed in **System** => **Administration** => **HTTP server configuration**.\\
The LAN interface is set to static IP - **192.168.100.100/24**.
</WRAP>
</WRAP>

  * Connect the Ethernet cable to the LAN gateway port and the LAN port of your PC (port to port). 
  * Configure static IP address for the LAN interface of your PC. For example: 192.168.100.101/24

{{:en:rdc:gateways:pc-ethernet-1_1.png?nolink&300|}} {{:en:rdc:gateways:pc-ethernet-2_.png?nolink&340|}}


  * In address bar of your browser (it is recommended to use [[https://www.mozilla.org/en-US/firefox/new/|Mozilla Firefox]] or [[https://www.google.com/intl/en/chrome/|Google Chrome]]), enter ''%%http://192.168.100.100%%'' or ''%%http://jogl-ffffff.local%%''. 

''ffffff'' - last three octets of the device's MAC address.


<WRAP box left>
Username: **admin**

Password: **lorawan**
</WRAP>

<WRAP clear/>

{{:en:rdc:gateways:authorization_.png?nolink&400|}}


<WRAP center round tip 50%>
<WRAP centeralign>
It is recommended to change the Administrator password when login in for the first time!
</WRAP>
</WRAP>

**System => Administration => Gateway password**

{{:en:rdc:gateways:pass_change.png?nolink&600|}}

  * **Password** => **Confirmation** => **Save**. - Can be reset to manufacturer using "Factory reset".

It is possible to set a user password as the "default password": 

  * **Password** => **Confirmation** => **toggle button - "Use as default"** => **Save**.
<wrap em>Warning!</wrap> "Use as default" - Sets a new "default password" and rewrite manufacturer password. Use it carefully. Pay attention on the warning in the pop-up window. <wrap em>Cannot be reset to manufacturer default via "Factory reset"</wrap>.
{{ :en:rdc:gateways:default_password.png?direct&400 |}}

===== SSH Access =====

By default:
  * SSH - disabled.
  * Port - 22.
  * Access to password - enabled. 
  * User - root.
  * Password - not specified.
It is neccessary to specify a password and/or keys when enabling SSH.
 

===== Network =====

==== Interface Priority ====

In case of using several connections (Ethernet + LTE), it is possible to select the interface through which LoRa packets will be sent. Interface number "0" (first in the list) is considered as priority. Use the UP/DOWN buttons to raise/lower priority. Use "Save" to apply the changes.

**Network => Interfaces => General**

{{:en:rdc:gateways:int_priority.png?nolink&800|}} 



==== Ethernet ====

Default IP address of the LAN gateway interface - ''192.168.100.100/24''.

You can change the IP address to a static one from your network or set it to automatically obtain addresses using the DHCP protocol.

**Network => Interfaces => Ethernet**

{{:en:rdc:gateways:int_lan_static.png?nolink&600|}} {{:en:rdc:gateways:int_lan_dhcp.png?nolink&600|}}


===== LoRaWAN =====
==== Settings ====

There are two variants of "LoRaWAN network settings" - **Packet Forwarder** or **Basic Station**.


{{:en:rdc:gateways:packet_forwarder.png?nolink&500|}} {{:en:rdc:gateways:Basic_station.png?nolink&500|}}

**Gateway ID** - Gateway identificator.

**Mode** - Operating mode (Packet Forwarder or Basic Station).

**Server address** - NS server address (Network Server).

**Region** - LoRaWAN frequency plans and rules for countries/regions. Defined in the regional plans section [[http://https://resources.lora-alliance.org/technical-specifications|LoRaWAN Regional Parameters]].



===== System =====
==== Firmware ====

{{:en:rdc:gateways:firmware.png?nolink&500|}}



  * **Firmware version** - Information about software version. Active memory bank.

  * **Bank configuration** - Switching memory bank. Can be set to - A/B. 

  * **Factory reset** - Reset to default settings.

  * **Flash new firmware image** - Software update using PC via Web interface.

===== Update settings =====

The remote/automatic software update subsystem uses a solution based on [[https://projects.eclipse.org/projects/iot.hawkbit|Eclipse hawkBit™]].

By default, software updates are configured on the equipment manufacturer's servers - ''gwupdate.infomir.com''. It is possible to configure and use your own update servers based on the Eclipse hawkBit™ solution. 

{{:en:rdc:gateways:update_settings.png?nolink&600|}}

===== Backup/Restore =====

Saving and restoring settings. It is possible to save the configuration to a file and then restore it after resetting to factory settings, or load the saved configuration on another device. 


{{:en:rdc:gateways:backup_restore.png?nolink&400|}}

===== Customization =====
It is possible to order a software version with user settings from the manufacturer. All user settings will work as (Factory settings) in this case. This can be done by request [[https://jooby.eu/contact-en/|Sales department]].

It is necessary to: 
  * Make/apply all settings in Web interface.
  * Save settings in file using Backup/Restore.
  * Submit files to the manufacturer through the sales department.