en:rdc:rms_for_novator []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== JOOBY AQUARIS RMS =======

<WRAP box right 40%>
==== Jooby Development  ====
  * [[https://github.com/jooby-dev/jooby-docs|Message documentation]]
  * [[https://github.com/jooby-dev/jooby-codec|Message encoders/decoders]]
  * [[https://jooby-dev.github.io/jooby-gui/|Message encoders/decoders GUI (Demo)]]
  * [[https://github.com/jooby-dev|API for interacting with Jobby devices. Other documentation]]
</WRAP>


===== JOOBY AQUARIS RMS 203 Radio module with sensor for Novator water meters. Installation. Activation =====


{{  :en:rdc:devices:jooby_aquaris_rms_2_.jpg?direct&400 |}}

<wrap em>The red circle indicates the area where the magnet should be placed.</wrap>
==== Determining the current state ====


  - Hold a magnet for 1 second
    - One short blink: the radio module is deactivated
    - Four short blinks: the radio module is activated

==== Activation / Deactivation ====

  - Bring and hold the magnet for 4-5 seconds
  - Remove the magnet immediately after a short blink
  - Wait for radio module response
    - Four short blinks: the radio module is activated, activation completed
    - One long and three short blinks: radio module is deactivated and it is necessary to activate it

==== Installation (Video) =====

{{youtube>e4UkM9beQnY|Installation  }}